Desanders With Polyurethane Hydrocyclone For Drilling Mud In Mining & Energy Business

Aipu series desander overcomes the shortcomings of the original desanding process. It is made up of inlet pipe, desanding hydrocyclone, underflow shaker and discharge port. Aipu's desander is with advantages of high-quality hydrocyclones, large capacity, strong separation ability, small noise, long service time, and easy maintenance. They are getting more and more attention from clients. mud desander is used as the 2nd Desanders are 2nd stage of solids control for drilling fluids, which makes separations between 45 and 75 μm. Our Desander uses a centrifugal pump to supply mud, then the mud enters into hydrocyclone along the tangent of the cyclone, and the mud's structure was crushed under the action of centrifugal force. Under the action of gravity, solid particles along the inner wall submerge spirally and are deboarded from the bottom of cyclone then falls on the following shale shaker, the liquid was discharged from the top of the cyclone.

Desander and desilter are important equipment for drilling liquid-solid control. It is mainly used for the second phase purification of drilling liquid. It removes nocuous solid, stabilizes drilling liquid properties, and improves drilling efficiency. The hydrodynamic cyclone of the desander is made of wear-resistant cast iron. It is reliable, effective, and serves long. The content of sand after the desander is controlled below 0.15%. Built on API RP 13C, with the certificate of authority to use the official API monogram.

The difference among mud cleaner, desander, and desilter

Drilling mud cleaner is also called Desander and Desilter assembly, which is the combination of desander, desilter and an underflow screen. Namely, mud cleaners consist of a two-stage separation process using a combination of hydrocyclones mounted over a shale shaker to operate as a single unit. Designed to handle the entire circulating volume, Drilling cuttings cleaners are effective on both weighted and unweighted drilling-fluid systems in removing and drying solids while retaining the expensive liquid. The hydrocyclones(desanders and desilters) make the primary separation with underflow directed onto the shaker's vibrating screen. Used correctly, the drilling mud cleaner lower both drilling fluid and disposal costs.

Why aipu's desander is your optimal choice

Aipu's Desander is an economical and practical desanding device. It is used as the second stage of the solids control system, separates solid particles' next stage equipment.

• Effective on both oil-base and water-base weighted and unweighted drilling fluid system in removing and drying solids;
• Minimizing waste generated and reducing disposal costs;
• Brand electrical components of ABB, Siemens, and Schneider adopted;
• Brand imported vibration motors of US Martin or Italy OLI adopted, IEC Ex, ATEX and UL Certified;

Specifications

AIPU Solids control is professional manufacturer on solids control equipment and system. The solution for drilling mud process as well as the drilling waste management, and the oli sludge treatment system.

All items can be used in oil and gas drilling, the oil sludge treatment, the HDD mud recycling, the civil construction micro tunnelling, the piling and so on. The main equipment inlcuding solids control system, shale shaker, mud cleaner, centrifgue decanter, degassers, agitator, mud gun, centrifugal pumps, mud tank, cuttings dryer, the mud cooling system and so on.

Pleased to say AIPU products have been delivered to many regions and conturies around the world. Including Germany, Russia, USA, UK, Kuwait,  UAE, India, Indonesia, Malaysia, Singapore, Taiwan, and so on.

Our hot sales product Hunter series shale shaker is rather popular with all of our clients. The Hunter-MG and Hunter-D shale shakers can be configured as linear motion, BEM or the dual motion. For the decks, they can be double deck. For the base, they can be dual tandem or triple tandem

Another hot sales products Hunter seires mud cleaner is maintained all the good features of Hunter series shaker. And the hydrocylones are all made of high quality polyurethane. Another feature is the cones are interchangeable with famous brand ones.

Besides the shale shaker and mud cleaner, there are centrifugal pumps, mud agitators and so on equipment appreciated by our clients. New innovated mud cooling system for land oil drilling is a patented products used in SINOPEC drilling site. The performance surprised end users.

Why clients select AIPU?

It's because of high qualty and the reasonable cost happened during our cooperation. We are professional on solids control, mud process, sludge treatment. Among all the orders there are over 80% orders are repeat orders from our regular clients or recommned by them

Are you in the demand of solids control or other mud treatment-related items now? Please come to us freely. Trust you will be surprised by AIPU products and servcies. All the solutions will be optimal and soonest one.